Emulsions


AZOCOL Z 1
Solvent and water resistant Diazo-UV-polymer photoemulsion

AZOCOL Z 1 is used for the production of high-quality, solvent and water resistant stencils. Universally suitable for nearly all applications in screen printing. Ink resistances are hardly affected by high air humidity. Easily decoatable.

 

AZOCOL Z 133
Solvent and water resistant Diazo-UV-polymer photoemulsion

AZOCOL Z 133 is used for the production of high-quality, solvent and water resistant stencils. High resolution and excellent mesh bridging make it suitable for printing finest half-tones, lettering and designs. Universally suitable for nearly all applications of screen printing. AZOCOL Z 133 is easily decoatable.

AZOCOL Z 140
For general use in screen printing

AZOCOL Z 140 - a veritable „all-rounder“ – due to its very good water and solvent resistance – suitable for all graphic screen printing jobs. Particularly noteworthy is the good image quality, combined with excellent print performance. Despite its good resistance values, AZOCOL Z 140 always remains easily decoatable.

AZOCOL Z 155
Solvent and water resistant Diazo UV-polymer emulsion

AZOCOL Z 155 is used for the production of high-quality, solvent and water resistant stencils. Especially suitable for printing with solvent aqueous printing media, e.g. water lacquers, water based plastic inks or water based adhesives. A relatively short exposure time makes it suitable for the direct projection system.

AZOCOL Z 160 HV
Highly viscous Diazo-UV-polymer photoemulsion

AZOCOL Z 160 HV is used for the production of high-quality, solvent and water resistant stencils. Highviscosity and solids content make it especially suitable for the coating of coarse mesh or for stencils thatrequire a high coating thickness (electronic industry, glass industry,...).

AZOCOL Z 173/1 FL-H
Chemically curable, solvent and water resistant, highly pure, dual-cure Diazo photoemulsion, especially suitable for printing finest half-tones, lettering and designs.

Product benefits:

  • like AZOCOL Z 177/1 FL
  • can additionally be hardened with KIWOSET FL
  • additionally: with highest possible resistance to many print runs
AZOCOL Z 177 FL
Solvent and water resistant, highly pure, dual-cure Diazo photoemulsion, especially suitable for printing finest half-tones, lettering and designs.

Product benefits:

  • highest resolution
  • excellent edge definition
  • high resistance in printing and cleaning processes
AZOCOL Z 177/1 FL
Further development of AZCOCOL Z 177 FL, which is already established on the market, in order to be able to meet increasing market requirements.

Product benefits:

  • Similar to the AZOCOL Z 177 FL with good paste release while printing and good chemical resistance
  • Optimizations:
    • Even with higher EOM (15 μm and more), high resolutions (20 μm and less) can be achieved
    • even lower sensitivity to potentially occurring reflections in the printing channel
AZOCOL X-Cel
Solvent resistant Diazo-UV-polymer photoemulsion with very low friction

AZOCOL X-CEL is used for the production of high-quality, solvent resistant stencils. The special slide effect, high resolution and excellent mesh bridging make it suitable for printing the finest half-tones, lettering and designs.

AZOCOL S 301 Gold
Solvent resistant Diazo-UV-polymer photoemulsion of maximum purity

AZOCOL S 301 GOLD is used for the production of high-quality, solvent and UV-ink resistant stencils. High resolution and excellent mesh bridging make it suitable for printing finest half-tones, lettering and designs (circuit boards, ceramic decals, scales). Due to its high elasticity AZOCOL S 301 GOLD is appropriate for printing hollow bodies and and for printing jobs where you print over material edges.

Due to the specific and optimized production processes AZOCOL S 301 GOLD offers maximum purity and fulfils therefore highest demands in screen printing, e.g. in the fields of electronics, medicine or solar technique. The new packaging concept avoids contamination by adherent dust particles.

AZOCOL S 305 FL
Solvent resistant, dual-cure Diazo photoemulsion, especially suitable for printing finest half-tones, lettering and designs

AZOCOL S 305 is used for the production of high-quality, solvent resistant stencils. High resolution and excellent mesh bridging make it suitable for printing finest half tones, lettering and designs. Optimum copying quality can be achieved on steel and polyester mesh. Notice: here the high resolution is given for applications up to a stencil build-up thickness of approx. 10-12 μm, then the exposure time will become clearly longer and the resolution might reduce.

AZOCOL S 306
Solvent resistant Diazo-UV-polymer photoemulsion, easily decoatable

AZOCOL S 306 is used for the production of high-quality, solvent and UV-ink resistant stencils. High resolution and excellent mesh bridging make it suitable for printing finest half-tones, lettering and designs (circuit boards, ceramic decals, scales). Due to its high elasticity AZOCOL S 306 is suitable for printing hollow bodies and if printing over material edges. Easily decoatable even after longest print runs.

AZOCOL S 309
Solvent resistant Diazo-UV-polymer photoemulsion, easily decoatable

AZOCOL S 309 is used for the production of high-quality, solvent resistant stencils. High resolution and excellent mesh bridging make it suitable for printing finest half-tones, lettering and designs (circuit boards, ceramic decals, scales). Since AZOCOL S 309 does not form a film under the influence of printing media or solvent cleaners, it is always easily decoatable.

AZOCOL S 390 Conduct
Solvent resistant, conductive Diazo-UV-polymer photoemulsion

AZOCOL S 390 Conduct is used for the production of high-quality, solvent resistant stencils, preferably used with the likewise conductive KIWOFILLER 409 Conduct. With electric conductive stencils static charge is avoided where squeegees are working very fast or when printing onto very smooth surfaces. Also, static charge during screen cleaning process is being avoided.

AZOCOL PolyPlus S
Solvent resistant Diazo-UV-polymer photoemulsion

AZOCOL POLY-PLUS S is used for the production of high-quality, solvent resistant stencils. High resolution and excellent mesh bridging make it suitable for printing finest half-tones, lettering and designs (circuit boards, ceramic decals, scales). Due to its high elasticity AZOCOL POLY-PLUS S is suitable for printing hollow bodies and if printing over material edges. A relatively good water resistance allows short runs with water based printing inks.

AZOCOL PolyPlus S-RX
Solvent and water resistant Diazo-UV-polymer emulsion

AZOCOL POLY-PLUS S-RX is used for the production of high-quality, solvent and water resistant stencils. Especially suitable for printing with solvent and aqueous inks, e.g. water lacquers, water based acrylic inks or dispersion based adhesives. Highest resolution and definition.

AZOCOL PolyPlus W
Water resistant, Diazo-UV-polymer photoemulsion with a high solids content

AZOCOL POLY-PLUS W is used for the production of high-quality, water resistant stencils. A relatively high solvent resistance makes it especially suitable for printing with solvent and aqueous printing inks as e.g. water based acrylic inks or dispersion based adhesives. The extraordinarily high solids content of approx. 45% permits a good equalization of the mesh structure.

AZOCOL PolyPlus HV
Highly viscous Diazo-UV-polymer photoemulsion

AZOCOL POLY-PLUS HV is used for the production of high-quality, solvent and water resistant stencils. High viscosity and solids content make it especially suitable for the coating of coarse mesh or for stencils that require a high coating thickness (electronic industry, gasket printing,...).

AZOCOL PolyPlus H-WR
Chemically curable Diazo-UV-polymer photoemulsion

AZOCOL POLY-PLUS H-WR is used for the production of high-quality, water resistant stencils. Due to a relatively good solvent resistance, ideal for long runs with water based plastic inks, which in most cases also contain solvents or monomers. The printing resistance can considerably be increased by chemical hardening with KIWOSET K-T. Before hardening, AZOCOL POLY-PLUS H-WR can be decoated with PREGASOL products.  

KIWOCOL 1
Highly solvent resistant Diazo-photoemulsion

KIWOCOL 1 is used for the production of solvent resistant stencils. Especially suitable when printing withplastic, UV and aluminium inks. It is a particular advantage of KIWOCOL 1 that it does not form a film onthe screen surface even when printing aggressive inks and therefore these screens remain always easily decoatable.

KIWOCOL 18
Solvent resistant, fast exposure Diazo-photoemulsion

KIWOCOL 18 is a fast exposure, solvent resistant Diazo-photoemulsion. Especially suitable if largequantities of stencils or large format stencils (poster printing) are required and when the UV-light sourceis set at a longer distance. KIWOCOL 18 is resistant to solvent based and UV reactive printing inks,screen openers, retarders, solvent cleaners etc.

KIWOCOL 227
Water resistant Diazo-photoemulsion

KIWOCOL 227 is used for the production of stencils which are resistant to aqueous printing media and plastisol inks. Mainly used for T’shirt and ceramic printing. Easily decoatable.

KIWOCOL 228 Blue
Water resistant Diazo-photoemulsion

KIWOCOL 228 Blue is used for the production of stencils which are resistant to aqueous printing mediaand plastisol inks. Mainly used for T-Shirt and ceramic printing. Easily decoatable.

KIWOCOL 380 H
Water- and solvent resistant Diazo-Emulsion

Water and solvent resistant, with good copying properties, suitable for T-shirt and textile printing stencils. The print run resistance can be considerably increased by chemical hardening with KIWOSET products. Due to its special composition, cleaning operations with solvents are possible without any problems.

POLYCOL S 210 Eco
Solvent resistant, one-component photopolymer emulsion based on renewable raw materials

POLYCOL S 210 Eco is used for the production of solvent resistant stencils. Due to its easy application and decoating, POLYCOL S 210 Eco is ideal for industrial use with large quantities of stencils and/ or large format stencils.

POLYCOL S 295 HV
UV ink and solvent resistant, highly viscous, one-component photopolymer emulsion for very high stencil build-up thicknesses with very good resolution

POLYCOL S 295 HV is a one-component photoemulsion. High viscosity and solids content make it especially suitable for direct coating of coarse mesh and the production of stencils with a high coating thickness. Stencils made with POLYCOL S 295 HV are typically used for printing tactile warning signs, braille or other haptic printing applications.

POLYCOL SupraPlus
Solvent resistant, one-component photopolymer emulsion

POLYCOL SUPRA PLUS is used for the production of high-quality, solvent resistant stencils. High resolution and excellent mesh bridging make it suitable for printing finest half-tones, lettering and designs (circuit boards, ceramic decals, bar-codes).

POLYCOL S-HR
Solvent-resistant, one-component SBQ-Emulsion

POLYCOL S-HR is a solvent-resistant, one-component SBQ emulsion, which is compatible for exposing with both CTS as well as conventional exposure systems. POLYCOL S-HR is solvent resistant, easily decoatable and suitable for both technical and graphic screen printing.

POLYCOL Uno
Solvent resistant, one-component photopolymer emulsion

POLYCOL Uno is used for the production of high-quality, solvent resistant stencils. On account of its easy application and decoating, ideal for industrial use with large quantities of stencils and/or large format stencils. POLYCOL Uno is suitable for almost all requirements for graphic screen printing.

 

POLYCOL W-HR
Solvent- and water-resistant, one-component SBQ-Emulsion

The POLYCOL W-HR is a water- and solvent-resistant, one-component SBQ emulsion, which can be efficiently exposed both by conventional methods and by CTS exposure systems.
The newly developed SBQ emulsions is suitable for textile applications and transfer printing, specifically where a high number of print runs is required. Furthermore,
POLYCOL W-HR is easily decoatable in automatic screen-washing machines.

POLYCOL XXL
Highly viscous, one-component photopolymer emulsion for very high stencil build-up thickness

POLYCOL XXL is a one-component photoemulsion. High viscosity and solids content make it especially suitable for direct coating of coarse mesh and the production of stencils with a high coating thickness. Stencils made with POLYCOL XXL are typically used for printing Plastisol, sealing compounds, special applications of the textile and ceramic industry, as well as granulates.

POLYCOL BN 60
Heat curable, one-component photopolymer emulsion

POLYCOL BN 60 is a thermally curable, one-component photoemulsion with an excellent resistance to all common printing inks. Suitable for textile and ceramic inks as well as for plastic, aluminium, UV- and thermoplastic inks. A special field of application is etch printing. Good resolution and edge definition. Before hardening, POLYCOL BN 60 can be decoated with PREGASOL products.

POLYCOL Micro
Solvent resistant, one-component photopolymer emulsion

POLYCOL MICRO is used for the production of high-quality, solvent resistant stencils. High resolution and excellent mesh bridging make it suitable for printing finest half-tones, lettering and designs (circuit boards, ceramic decals, scales). Due to a relatively good water resistance it is also suitable for short runs with water based inks.

AZOCOL Z 110 CTS Violet
Solvent and water resistant, Diazo-UV-Polymer emulsion

AZOCOL Z 110 CTS VIOLET is used for the production of high-quality, solvent and water resistantstencils which are made through conventional exposure systems or with the KIWO SCREENSETTER. Good resolution and excellent mesh bridging make it suitable for printing large half-tone posters.

POLYCOL S 270 CTS Violet
Solvent resisitant, one-component emulsion

POLYCOL S 270 CTS Violet is used for the production of high-quality, solvent resistant stencils. Good resolution and excellent mesh bridging make it suitable for the use in Computer-to-Screen (CtS) units. POLYCOL S 270 CTS Violet is solvent resistant and therefore highly suitable for technical and graphic screen-printing.

POLYCOL Z 540 CTS Violet
Solvent and water resistant, one-component emulsion

POLYCOL Z 540 CTS Violet is used for the production of high quality, solvent and water resistant stencils made by conventional exposure or with CTS units. Excellent resolution and mesh bridging make it suitable for large-scale screen-printing applications (e.g. flat glass printing).

POLYCOL Z 542 CTS
Solvent and water resistant photopolymer emulsion, one-component

POLYCOL Z 542 CTS is used for the production of high-quality, solvent and water resistant stencils exposed conventional exposure processes or CTS units. Excellent resolution and mesh bridging make it suitable for large format applications (e.g. flat glass).

TEXSOL 680 CTS
Chemically curable, water resistant, one-component SBQ emulsion

TEXSOL 680 CTS is used for the production of stencils resistant to aqueous printing media. The main field of application is textile printing, e.g. T-shirt or flag printing. TEXSOL 680 CTS is highly sensitive to light and thus also suitable for DMD systems. A wax jet system can also be used. To resist to long printing runs, TEXSOL 680 CTS can be chemically hardened. The standard hardener is KIWOSET K-T. Before hardening, TEXSOL 680 CTS can be easily decoated with PREGASOL products. Hardened screens are no longer decoatable.

CERACOP 2300
Chemically curable Diazo-UV-polymer photoemulsion

CERACOP 2300 is used for the production of high-quality, water and solvent resistant screen and textile printing stencils. The print run resistance can considerably be increased by chemical hardening with KIWOSET K-T. Before hardening, CERACOP 2300 is decoatable with PREGASOL products. Mainly used for textile and ceramic printing.

 

CERACOP 2302 T
Chemically curable Diazo-UV-polymer photoemulsion

CERACOP 2302 T is used for the production of high-quality, water and solvent resistant screen and textile printing stencils. The print run resistance can considerably be increased by chemical hardening with KIWOSET K/ 2. Before hardening, CERACOP 2302 T is decoatable with PREGASOL products. Mainly used for textile and ceramic printing.

CERACOP HV
Water resistant, highly viscous, chemically curable Diazo-UV-polymer photoemulsion

CERACOP HV is used for the production of high-quality, water resistant stencils. High viscosity makes it especially suitable for the coating of coarse mesh or the production of stencils with a high coating thickness. The printing resistance can considerably be increased by chemical hardening with KIWOSET K-T or A-WR when using very aggressive inks (e.g. very acid printing pastes). Before hardening CERACOP HV is decoatable with PREGASOL products, after hardening decoating is no longer possible.

CERACOP 3001 HV
Highly viscous, chemically curable one-component emulsion

CERACOP 3001 HV is used for the production of high-quality stencils. Mainly used for ceramic direct printing. Due to its high viscosity it is especially suitable for the coating of coarse meshes and for the production of stencils requiring a high coating thickness. The print run resistance can considerably be increased by chemical post-hardening. Before hardening CERACOP 3001 HV can be decoated with PREGASOL products, after hardening it is no longer decoatable.